首页|期刊导航|Journal of Magnesium and Alloys|Overcoming geometric embrittlement in Mg–Li foils through grain refinement and grain-boundary–mediated deformation

Overcoming geometric embrittlement in Mg–Li foils through grain refinement and grain-boundary–mediated deformationOA

中文摘要

Ultrathin metallic foils deform under plane-stress conditions,where the absence of through-thickness constraint and a low thickness-tograin-size ratio(t/d)promote early necking and severely limit uniform elongation.Here,we demonstrate that high-ratio differential speed rolling(HRDSR)mitigates these geometric limitations in Mg–10Li alloy foils by refining grains to the nearly ultrafine regime,thereby increasing t/d and activating grain-boundary–mediated deformation.Foils 100μm thick with grain sizes of 1.1μm(t/d≈91)exhibit elongations exceeding 30%at 10^(−5)s^(−1),whereas coarse-grained counterparts(29.4μm,t/d≈3.4)of the same thickness fail abruptly with<1%uniform strain under identical conditions.Micro-pattern formability tests confirm homogeneous deformation and high surface fidelity in ultrafine-grained foils,in sharp contrast to severe strain localization and pattern collapse in coarse-grained samples.Strain-rate jump tests on the ultrafine-grained foils reveal an elevated strain-rate sensitivity(m≈0.23)and low activation volumes(15–30 b3)at low strain-rates,suggesting that deformation is governed by a combined contribution of grain boundary sliding(GBS)and dislocation climb creep(DCC).A unified constitutive framework captures the transition from DCC at moderate strain-rates to GBS at low rates.The present findings demonstrate that refining Mg–Li alloys to a quasi-ultrafine-grained regime effectively overcomes the intrinsic ductility limitations imposed by plane-stress geometry,thereby enabling their practical application in flexible electronics,bioresorbable implants,and lightweight energy-storage systems.

Hee-Tae Jeong;Woo Jin Kim

Department of Materials Science and Engineering,Hongik University,94 Wausan-ro,Mapo-gu,Seoul,04066,Republic of KoreaDepartment of Materials Science and Engineering,Hongik University,94 Wausan-ro,Mapo-gu,Seoul,04066,Republic of Korea

矿业与冶金

Magnesium-lithium alloysFoilsRollingGrain sizeGrain boundary sliding

《Journal of Magnesium and Alloys》 2026 (3)

P.216-230,15

financially supported by the Mid-Career Researcher Program through the National Research Foundation of Korea funded by the Ministry of Education,Science and Technology(RS-2024-00350484).

10.1016/j.jma.2025.11.013

评论