列控中心与计算机联锁接口安全通信协议测试研究OA
Research on Testing of Secure Communication Protocol for Interface Between Train Control Center and Computer Based Interlocking
为实现规范化的接口通信协议测试,保障数据安全准确传输,以列控中心(TCC)与计算机联锁(CBI)间接口为典型,研究铁路安全通信协议测试方法.首先分析 TCC 与 CBI 通信采用的铁路信号安全通信协议-I(Railway Signal Safety Communication Protocol-I,RSSP-I),系统梳理通信架构、报文组成及数据交互.其次研究TCC与CBI接口,提出接口应用数据及安全层构建方法.最后提出用于 TCC 与 CBI 接口通信协议测试平台,通过接口模拟器,实现接口数据发送与接收测试.
To achieve the standardized testing of interface communication protocols and ensure secure and accurate data transmission,this study focuses on the testing methods of railway secure communication protocols,taking the interface between Train Control Center(TCC)and Computer Based Interlocking(CBI)as a typical case.Firstly,the Railway Signal Safety Communication Protocol-I(RSSP-I)employed for the communication between TCC and CBI is investigated,and its communication architecture,telegram composition and data interaction are analyzed.Secondly,the interface between TCC and CBI is studied,and methods for constructing the interface application data and the security layer are proposed.Finally,a testing platform for the interface communication protocol between TCC and CBI is developed.The transmission and reception of interface data are also tested with the aid of an interface simulator.
李小帅;王祺;路飞
中铁检验认证中心有限公司,北京 100081||中国铁道科学研究院集团有限公司标准计量研究所,北京 100081中铁检验认证中心有限公司,北京 100081||中国铁道科学研究院集团有限公司标准计量研究所,北京 100081卡斯柯信号有限公司,北京 100070
交通工程
安全通信协议接口测试列控地面设备接口模拟器
secure communication protocolinterface testingwayside train control equipmentinterface simulator
《铁路通信信号工程技术》 2026 (5)
37-44,8
中国国家铁路集团有限公司重大课题资助项目(K2024B003)中铁检验认证中心有限公司自主投入重点项目资助项目(BJ2024S03)
评论