脉冲电流对347H不锈钢GMAW焊接接头微观组织和力学性能的影响OA
Effect of pulsed current on the microstructure and mechanical properties of GMAW welded joints of 347H stainless steel
为探究熔化极气体保护焊(GMAW)在高温熔盐储罐工程中的适用性,针对347H不锈钢分别进行施加脉冲与不施加脉冲两种焊接工艺试验.利用光学显微镜与扫描电镜观察焊接接头组织,并对其力学性能等进行评估.结果表明:不施加脉冲的焊接接头存在夹渣缺陷,而施加脉冲的焊接接头未出现夹渣、气孔等缺陷;焊缝组织主要由柱状及树枝晶状奥氏体和析出相构成;不施加脉冲的焊接接头抗拉强度未达到工程应用要求,其焊缝区的冲击性能和侧弯性能均不合格;而施加脉冲的焊接接头在565℃下的高温拉伸性能(Rm≥139 MPa,Rp0.2≥360 MPa)与-196℃低温冲击性(≥31 J)能均满足GB/T 150-2024及制造相关工程技术要求.研究为GMAW焊接技术在不锈钢压力容器制造领域的可靠应用与质量保障提供了理论与试验支撑.
To investigate the applicability of gas metal arc welding(GMAW)in high-temperature molten salt storage tank engineering,two welding process tests,with and without pulse application,were conducted on 347H stainless steel.The microstructure of the welded joints was observed using optical microscopy and scanning electron microscopy,and their mechanical properties were evaluated.The results show that the welded joint without pulse application exhibited slag inclusion defects,while the welded joint with pulse application showed no slag inclusion,porosity,or other defects;the weld microstructure mainly consisted of columnar and dendritic austenite and precipitated phases.In contrast,the welded joint with pulse application exhibited high-temperature tensile properties at 565℃(Rm≥139 MPa,Rp0.2≥360 MPa)and low-temperature impact properties at-196℃(≥31 J)that met the requirements of GB/T 150-2024 and related manufacturing engineering technical specifications.This study provides theoretical and experimental support for the reliable application and quality assurance of GMAW welding technology in the manufacturing field of stainless steel pressure vessels.
王喜平;朱小燕;李永都;王军杰;李义民
兰州兰石重型装备股份有限公司,兰州 730000||甘肃省压力容器焊接重点实验室,兰州 730000||甘肃省压力容器行业技术中心,兰州 730000||甘肃省大型板焊结构压力容器技术创新中心,兰州 730000兰州兰石重型装备股份有限公司,兰州 730000||甘肃省压力容器焊接重点实验室,兰州 730000||甘肃省压力容器行业技术中心,兰州 730000||甘肃省大型板焊结构压力容器技术创新中心,兰州 730000兰州兰石重型装备股份有限公司,兰州 730000||甘肃省压力容器焊接重点实验室,兰州 730000||甘肃省压力容器行业技术中心,兰州 730000||甘肃省大型板焊结构压力容器技术创新中心,兰州 730000兰州兰石重型装备股份有限公司,兰州 730000||甘肃省压力容器焊接重点实验室,兰州 730000||甘肃省压力容器行业技术中心,兰州 730000||甘肃省大型板焊结构压力容器技术创新中心,兰州 730000兰州兰石重型装备股份有限公司,兰州 730000||甘肃省压力容器焊接重点实验室,兰州 730000||甘肃省压力容器行业技术中心,兰州 730000||甘肃省大型板焊结构压力容器技术创新中心,兰州 730000
机械制造
347H不锈钢脉冲熔化极气体保护焊力学性能
347H stainless steelpulsegas metal arc weldingmechanical properties
《压力容器》 2026 (2)
27-34,8
国家市场监督管理总局科技计划项目(2024MK129)甘肃省重点研发计划-工业类项目(24YGA018)
评论