首页|期刊导航|江西建材|装配式宿舍楼建筑现浇混凝土框架梁裂缝检测及成因分析

装配式宿舍楼建筑现浇混凝土框架梁裂缝检测及成因分析OA

Detection and Cause Analysis of Cracks in Cast-in-place Concrete Frame Beams of Prefabricated Dormitory Buildings

中文摘要英文摘要

为研究装配式宿舍楼现浇混凝土框架梁的裂缝与成因,文中以江西省某装配式宿舍楼项目为依托,通过建立精细化有限元模型,系统分析了梁体在竖向荷载作用下的应力响应、裂缝宽度发展规律及箍筋约束效应.结果表明,应力分布与弹性理论中框架梁的弯矩和剪力分布规律一致,这验证了模型的有效性;随着梁承受剪力与荷载的增大,梁裂缝宽度均呈现出逐渐增大趋势.裂缝宽度随箍筋间距(100、150、200 mm)增加而增长.综上所述,现浇梁裂缝是以材料收缩与温度变化为主因,并因箍筋约束不足与施工控制不严而发展的非结构性裂缝.

To study the cracks and their causes in the cast-in-place concrete frame beams of prefabricated dormitory buildings,this paper,based on a prefabricated dormitory building project in Jiangxi Province,systematically analyzes the stress response of the beam body under vertical loads,the development law of crack width,and the constraint effect of stirrups by establishing a refined finite element model.The results show that the stress distribution is consistent with the bending moment and shear force distribution laws of the frame beam in the elastic theory,verifying the validity of the model.With the increase of shear force and load on the beam,the width of the beam cracks shows a gradually increasing trend.The crack width increases with the spacing of stirrups(100,150,200 mm).In conclusion,the cracks in cast-in-place beams are mainly caused by material shrinkage and temperature changes,and develop as non-structural cracks due to insufficient stirrup restraint and lax construction control.

曾德华

江西省赣州昌顺工程建设监理有限公司,江西 赣州 341000

建筑与水利

装配式建筑框架梁裂缝现浇混凝土

Prefabricated buildingCracks in the frame beamCast-in-place concrete

《江西建材》 2026 (2)

100-102,3

评论