首页|期刊导航|光通信技术|基于Nd:YVO4/YVO4键合晶体的皮秒激光器研究

基于Nd:YVO4/YVO4键合晶体的皮秒激光器研究OA

Study of picosecond laser based on Nd:YVO4/YVO4 bonded crystal

中文摘要英文摘要

为了缓解高功率皮秒激光器中增益介质的热透镜效应,提高稳定锁模输出功率,研究设计了基于Nd:YVO4/YVO4键合晶体的皮秒激光器,采用888 nm半导体激光器作为泵浦源以降低热负载,并利用可饱和吸收镜(SESAM)构建折叠谐振腔实现稳定锁模.实验结果表明,在28.9 W最大泵浦功率下,系统实现了中心波长1064 nm的连续锁模输出,获得7.4 W的最大平均功率,脉冲宽度为20.4 ps,重复频率为120 MHz,光-光转换效率约25%,平均光束质量因子约为1.33.

To mitigate the thermal lensing effect of the gain medium in high-power picosecond lasers and improve the stable mode-locked output power,a picosecond laser based on Nd:YVO₄/YVO₄ bonded crystal is designed.An 888 nm semiconduc-tor laser was used as the pump source to reduce thermal load,and a semiconductor saturable absorber mirror(SESAM)is em-ployed to construct a folded resonator for stable mode-locking.Experimental results show that at a maximum pump power of 28.9 W,the system achieves continuous-wave mode-locked output at a central wavelength of 1 064 nm,with a maximum aver-age power of 7.4 W,pulse duration of 20.4 ps,repetition rate of 120 MHz,optical-to-optical conversion efficiency of approxi-mately 25%,and average beam quality factor of about 1.33.

余泓霖;谢松霖;张振荣;董书秋;张超凡;梁正友

广西大学 计算机与电子信息学院,南宁 530004广西大学 计算机与电子信息学院,南宁 530004广西大学 计算机与电子信息学院,南宁 530004||广西大学 广西多媒体通信与网络技术重点实验室,南宁 530004广西北港大数据科技有限公司,南宁 530004国防科技大学 前沿交叉学科学院,长沙 410073广西大学 计算机与电子信息学院,南宁 530004

信息技术与安全科学

皮秒激光键合晶体连续锁模Nd:YVO4热透镜

picosecond laserbonded crystalcontinuous-wave mode-lockingNd:YVO4thermal lens

《光通信技术》 2026 (2)

72-78,7

广西重点研发计划项目(桂科AB23075200)资助.

10.13921/j.cnki.issn1002-5561.2026.02.012

评论