首页|期刊导航|广东水利水电|浅深度矩形折板竖井消能优化研究

浅深度矩形折板竖井消能优化研究OA

Optimization Study on Energy Dissipation of Shallow Burial Depth Rectangular Baffle-drop Shaft

中文摘要英文摘要

针对城市深隧工程中浅深度矩形竖井在折板数量限制下的消能问题,以深圳沙湾河深隧工程为例,采用三维数值模拟方法,开展折板竖井消能研究.成果表明:浅深度条件下,折板数量受限时,通过折板长度与间距的协同优化可有效改善消能效果;首块折板缩短后至4.75 m、末块折板缩短至5.25 m可确保水流在各折板间形成自由跌流,并准确跌入井底水垫区旋滚消能;折板壅水区水团高度明显低于通气孔位置,水流溅起影响通气的可能性较小,各折板与底板最大冲击压力分别为52.0 kPa、52.3 kPa、48.0 kPa、59.8 kPa.研究成果可为类似工程提供借鉴.

Taking the Shenzhen Shawan River deep tunnel project as an example,a three-dimensional numerical simulation method was used to study the energy dissipation problem of shallow rectangular baffle-drop shafts in urban deep tunnel projects under the limitation of baffle plate quantities.The results show that under shallow buried conditions,when the number of baffle plates is limited,the synergistic optimization of plate length and spacing can effectively improve the energy dissipation effect.Shortening the first plate to 4.75 m and the last plate to 5.25 m can ensure that the water flow forms a free fall between each plate and accurately falls into the water cushion zone at the bottom of the well for energy dissipation.The height of the water mass in the baffle ponding zone is significantly lower than the position of the ventilation hole,and the possibility of water splashing affecting ventilation is relatively small.The maximum impact pressures of each baffle plate and bottom plate are 52.0 kPa,52.3 kPa,48.0 kPa,and 59.8 kPa,respectively.The research results can provide reference for similar projects.

产斯东;廖智颖;张金明

深圳市罗湖区水务局,广东 深圳 518121珠江水利委员会珠江水利科学研究院,广州 510611珠江水利委员会珠江水利科学研究院,广州 510611

交通工程

深隧排水矩形折板竖井浅深度消能流态优化数值模拟

deep tunnel drainagerectangular baffle-drop shaftshallow buried depth energy dissipationflow state optimizationnumerical simulation

《广东水利水电》 2026 (4)

13-19,7

国家自然科学基金项目(编号:52401356)国家重点研发计划项目(编号:2023YFC3007900).

评论