首页|期刊导航|Computer Modeling in Engineering & Sciences|Modeling of the Separation Bubble on Cambered Airfoils Utilizing Modified Parameters in a Transition Model

Modeling of the Separation Bubble on Cambered Airfoils Utilizing Modified Parameters in a Transition ModelOA

中文摘要

Separation bubbles forming on airfoils significantly influence aerodynamic behavior,particularly at low Reynolds numbers,making their accurate prediction a critical challenge in transition modelling.This study investigates numerical modeling of a separation bubble and the effects of airfoil thickness and camber variation on the formation of the bubble dynamics at low Reynolds numbers.The numerical results were compared with the experimental results obtained from surface pressure distribution measurements,oil flow visualisation,and surface shear measurements to analyse the detailed flow behavior.The combination of pressure and flow visualisation techniques provided complementary insights,enabling a detailed characterisation of bubble formation.The results reveal that both the thickness and camber of the airfoil significantly influence the location,length,and stability of the bubble.At low Reynolds number flows(Re=0.5×10^(5)),particularly for highly cambered profiles,closer to the leading edge,separation and long bubbles were observed.As the Reynolds number increased,the separation point shifted to the leading edge,and reattachment became more likely.In numerical studies,transition models can accurately model the bubble initiation point;however,they often fail to model the bubble reattachment points accurately.This is due to the inadequacy of models that use empirical expressions for turbulence modelling,particularly in low Reynolds number flows,in their viscous modelling.In this study,it was concluded that transition onset terms,which specifically affect bubble formation,should be modified for more accurate modeling.

Eren Anıl Sezer;Muhammer Ayvazoğlu;Muhammed Hatem;Sinem Keskin;MustafaÖzden;Mustafa Serdar Genç;Halil Hakan Açıkel

Wind Engineering and Aerodynamic Research Laboratory,Department of Energy Systems Engineering,Erciyes University,Kayseri,Türkiye Graduate School of Natural and Applied Science,Erciyes University,Kayseri,Türkiye MSG Teknoloji Ltd.Şti,Erciyes Teknopark Tekno-1 Binası,61/20,Kayseri,TürkiyeWind Engineering and Aerodynamic Research Laboratory,Department of Energy Systems Engineering,Erciyes University,Kayseri,Türkiye Graduate School of Natural and Applied Science,Erciyes University,Kayseri,TürkiyeWind Engineering and Aerodynamic Research Laboratory,Department of Energy Systems Engineering,Erciyes University,Kayseri,Türkiye Graduate School of Natural and Applied Science,Erciyes University,Kayseri,TürkiyeWind Engineering and Aerodynamic Research Laboratory,Department of Energy Systems Engineering,Erciyes University,Kayseri,Türkiye Graduate School of Natural and Applied Science,Erciyes University,Kayseri,TürkiyeWind Engineering and Aerodynamic Research Laboratory,Department of Energy Systems Engineering,Erciyes University,Kayseri,Türkiye Dominion Energy Innovation Center,Clemson University,North Charleston,SC,USAWind Engineering and Aerodynamic Research Laboratory,Department of Energy Systems Engineering,Erciyes University,Kayseri,Türkiye MSG Teknoloji Ltd.Şti,Erciyes Teknopark Tekno-1 Binası,61/20,Kayseri,TürkiyeWind Engineering and Aerodynamic Research Laboratory,Department of Energy Systems Engineering,Erciyes University,Kayseri,Türkiye

航空航天

Bubble dynamicstransition modelingcambered airfoiltransition onset

《Computer Modeling in Engineering & Sciences》 2026 (3)

P.635-662,28

the Scientific and Technological Research Council of Turkey(TÜB˙ITAK)for support under project number:122M826to the Scientific Research Projects Unit of Erciyes University under contract No.:FYL-2023-13162 and FYL-2024-13701.

10.32604/cmes.2026.076446

评论