首页|期刊导航|eScience|Interface-engineered metalized plastic current collectors for fast-charging lithium-ion batteries with high safety and stability

Interface-engineered metalized plastic current collectors for fast-charging lithium-ion batteries with high safety and stabilityOA

中文摘要

Adopting the metalized plastic current collector(MPCC)enhances the safety and specific energy density of lithium-ion batteries(LIBs)but sacrifices the rate capability.The reduced rate capability is customarily ascribed to the lower electronic conductivity of MPCC as compared with the metal ones(e.g.,Al and Cu)due to the less metal usage.Here,we demonstrate that the interfacial contact between the current collector(CC)and the active-material layer,rather than the electronic conductivity of CC,accounts for the rate performance of the cells.By introducing a thin carbon coating(~300 nm)onto the surface of MPCC(e.g.,1μm thick aluminum deposited on both sides of 10μm polyethylene terephthalate(PET)film,Al-PET),we reduced the contact resistance between MPCC and cathode materials.Using the carbon-coated Al-PET(C@Al-PET)as CC,the 6.0-Ah graphite/LiCoO_(2)pouch cell delivers significantly improved fast-charge capability and cycling stability,which are identified as the homogenized potential distribution and electrode utilization with multiphysical field simulations.Most importantly,the cell with C@Al-PET CC could still pass the harsh impact test,promising its applications in high-rate LIBs with superior safety.

Chaofan Liang;Jie Ji;Yaqi Liao;Tianyi Hou;Zhikang Liu;Hongbin Xie;Kui Li;Xinpeng Pi;Donghai Wang;Xiaoyu Jin;Weichen Du;Long Qie

State Key Laboratory of Material Processing and Die&Mould Technology,School of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,ChinaState Key Laboratory of Material Processing and Die&Mould Technology,School of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,ChinaState Key Laboratory of Material Processing and Die&Mould Technology,School of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,ChinaState Key Laboratory of Material Processing and Die&Mould Technology,School of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,ChinaZhejiang Rouzhen Technology Corp.,Ltd.,Jiaxing 314499,ChinaGuangdong OPPO Mobile Telecommunications Corp.,Ltd.,Dongguan 523846,ChinaGuangdong OPPO Mobile Telecommunications Corp.,Ltd.,Dongguan 523846,ChinaState Key Laboratory of Material Processing and Die&Mould Technology,School of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,ChinaCollege of Renewable Energy,Hohai University,Changzhou 213200,ChinaState Key Laboratory of Material Processing and Die&Mould Technology,School of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,ChinaState Key Laboratory of Material Processing and Die&Mould Technology,School of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,ChinaState Key Laboratory of Material Processing and Die&Mould Technology,School of Materials Science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,China

信息技术与安全科学

Current collectorLithium-ion batteryFast-chargingSafety

《eScience》 2026 (1)

P.152-161,10

support of the National Key R&D Program of China(2022YFB3803500)Zhejiang Rouzhen Technology Corp.,Ltd.,and OPPO Mobile Telecommunications Corp.,Ltd.

10.1016/j.esci.2025.100432

评论