Zn-Al1.0%-Sb0.29%合金的质量改进OA
Quality Improvement of Zn-Al1.0%-Sb0.29%Alloy
结合热镀锌合金生产实际,论文介绍了热镀用Zn-Al1.0%-Sb0.29%三元合金的生产工艺流程,并简述了Zn-Al和Zn-Sb中间合金的成分及工艺条件.同时针对Zn-Al1.0%-Sb0.29%三元合金生产过程中的一次合格率低及物规缺陷等问题,从中间合金质量、配料和操作等方面,提出了该合金质量改进的措施.此外,论文指出了该三元合金今后的研究方向.
Combined with the practical production of hot-dip galvanizing alloys,this paper introduces the production process flow of the Zn-Al1.0%-Sb0.29%ternary alloy for hot-dip galvanizing,and briefly describes the compositions and process conditions of Zn-Al and Zn-Sb master alloys.Meanwhile,aiming at the problems such as low first-pass yield and physical specification defects in the production of Zn-Al1.0%-Sb0.29%ternary alloy,quality improvement measures for the alloy are proposed from the aspects of master alloy quality,batching and operation.In addition,the paper points out the future research directions of this ternary alloy.
黄义平
湖南有色金属控股集团有限公司,湖南 长沙 410015
矿业与冶金
热镀用Zn-Al1.0%-Sb0.29%三元合金Zn-Al和Zn-Sb中间合金一次合格率低及物规缺陷中间合金质量配料操作
Zn-Al1.0%-Sb0.29%ternary alloy for hot-dip galvanizingZn-Al and Zn-Sb master alloyslow first-pass yieldphysical specification defectsmaster alloy qualitybatchingoperation
《世界有色金属》 2026 (4)
24-26,3
评论