首页|期刊导航|江西建材|装配式钢结构索力学特性及施工误差敏感性仿真研究

装配式钢结构索力学特性及施工误差敏感性仿真研究OA

Simulation Study on the Mechanical Characteristics of Cable Force and Construction Error Sensitivity of Prefabricated Steel Structures

中文摘要英文摘要

为减小装配式钢结构施工误差,文中以某体育场钢结构体系为研究对象,基于Abaqus建立结构数值模型,系统分析了钢结构索力和位移随施工变化规律及径向索长度和环梁节点施工产生的误差对钢结构索力变化敏感性.结果表明,不同索轴索力和位移变化随施工步骤变化规律较为一致,最大位移量均小于700 mm,验证了施工模拟的有效性;单根径向索的长度误差和环梁施工偏差均对其所在桁架单元的索力影响最大,误差发生时,相邻单元索力增大,间隔单元所受影响最小,各索索力变化量随着与误差所在桁架间距的增加而逐渐减小.综上可知,可依据索力和位移变化规律针对性减小钢结构施工误差.

To reduce the construction errors of prefabricated steelstructures,this paper takes a certain stadium as the research object,establishes a structural numerical model based on Abaqus,and systematically analyzes the variation laws of steel structure cable force and displacement with construction,as well as the sensitivity of the errors generated by the construction of radial cable length and ring beam nodes to the changes of steel structure cable force.The results show that the variation laws of the cable force and displacement of different cable shafts with the construction steps are relatively consistent,and the maximum displacement is all less than 700 mm,verifying the validity of the construction simulation.The length error of a single radial cable and the construction deviation of the ring beam have the greatest impact on the cable force of the truss unit where it is located.When the error occurs,the cable force of adjacent units increases,while the interval units are least affected.The variation of the cable force of each cable gradually decreases as the distance from the truss where the error is located increases.In conclusion,the construction errors of steel structures can be reduced in a targeted manner based on the variation laws of cable force and displacement.

贾彦男;张峻铭;王义缘

铁法煤业集团勘测设计有限责任公司,辽宁 调兵山 112700中国中元国际工程有限公司,北京 100080吉林省建筑科学研究设计院,吉林 长春 130000

建筑与水利

装配式建筑钢结构力学性能施工误差敏感性分析

Prefabricated buildingSteel structureMechanical propertiesConstruction errorSensitivity analysis

《江西建材》 2026 (1)

69-71,3

评论