首页|期刊导航|广东水利水电|基于单轴抗压试验的塑性混凝土尺寸效应研究

基于单轴抗压试验的塑性混凝土尺寸效应研究OA

Study on Size Effect of Plastic Concrete Based on Uniaxial Compression Tests

中文摘要英文摘要

与普通混凝土防渗墙相比,塑性混凝土防渗墙不仅具有良好的抗渗能力,还能与周围土体变形相协调.由于防渗墙等水工建筑物的尺寸较大,考虑到塑性混凝土力学性能与几何尺寸及几何形状的相关性,开展了塑性混凝土尺寸效应的试验研究.结果表明,随着混凝土底面尺寸增大,塑性混凝土单轴抗压强度的峰值应力下降、峰值应变减小、弹性模量无明显变化规律,构建的塑性混凝土峰值应力尺寸效应模型,在拟合峰值应力时相关系数高于0.96,拟合峰值应变时相关系数高于0.8.研究结果可以为塑性混凝土尺寸效应的影响提供参考.

Compared with ordinary concrete anti-seepage walls,plastic concrete anti-seepage walls not only have good anti-seepage ability,but also can coordinate with the deformation of the surrounding soil.Due to the large size of hydraulic structures such as anti-seepage walls,considering the correlation between the mechanical properties of plastic concrete and its geometric size and shape,this study carried out an experimental study on the size effect of plastic concrete.The results show that as the size of the concrete bottom increases,the peak stress of the uniaxial compressive strength of plastic concrete decreases,the peak strain decreases,and the elastic modulus has no obvious change pattern.The correlation coefficient of the size effect model of plastic concrete peak stress is higher than 0.96 when fitting the peak stress,and higher than 0.8 when fitting the peak strain.The results can provide a reference for the size effect of plastic concrete.

韩冰

韶关市水利水电勘测设计咨询有限公司,广东 韶关 512026

建筑与水利

塑性混凝土单轴抗压强度试验力学性能

plastic concreteuniaxial compressive strength testmechanical properties

《广东水利水电》 2026 (3)

11-16,6

评论