抗应变干扰温度传感纤维的制备及性能研究OA
Preparation and performance study of strain-insensitive tem-perature sensing fiber
针对传统温度传感器在人体运动或复杂工业环境中易受应变干扰的问题,通过内部螺旋结构设计和多壁碳纳米管(MWCNT)质量分数调控,制备了抗应变干扰温度传感纤维.采用三层同轴湿法纺丝技术,将热塑性聚氨酯(TPU)/MWCNT、去离子水、TPU溶液同时泵入内层、中间层和外层通道,在外层TPU空间限制下,利用累积应力的释放和"液体绳卷曲效应"实现连续化制备螺旋纤维.结果表明:20%应变下大节距纤维电阻变化率约为6%,50%~100%应变下为10%~30%,大节距纤维ΔR/R0随温度的升高而下降,曲线斜率为-0.40%/℃,表明其温度敏感性较好.在受到应变的情况下,该传感纤维能够稳定监测环境温度变化,为抗应变干扰温度传感器的设计与开发提供了新思路.
To address the issue that traditional temperature sensors are easily affected by strain during human move-ment or in complex industrial environments,a strain-insensitive temperature sensing fiber was fabricated through inter-nal helical structure design and regulation of the mass fraction of multi-walled carbon nanotubes(MWCNTs).Using a three-layer coaxial wet-spinning technique,thermoplastic polyurethane(TPU)/MWCNTs composite,deionized water,and TPU solution were simultaneously pumped into the inner,middle,and outer channels respectively.Under the spatial confinement of the outer TPU layer,continuous preparation of helical fibers was achieved via the release of accumulat-ed stress and the"liquid rope coiling effect".The results show that under 20%strain,the resistance change rate of long-pitch fibers is about 6%,and ranges from 10%to 30%under 50%~100%strain The ΔR/R0 of the long-pitch fibers de-creases with increasing temperature,with a curve slope of-0.40%/℃,indicating excellent temperature sensitivity.When subjected to strain,the sensing fiber can still stably monitor changes ambient temperature,providing new in-sights for the design and development of strain-insensitive temperature sensors.
牟维;张羽洁;李哲;朱立成;方剑;牛丽
苏州大学纺织与服装工程学院 江苏 苏州 215123||苏州大学现代丝绸国家工程实验室,江苏苏州 215123苏州大学纺织与服装工程学院 江苏 苏州 215123||苏州大学现代丝绸国家工程实验室,江苏苏州 215123苏州大学纺织与服装工程学院 江苏 苏州 215123||苏州大学现代丝绸国家工程实验室,江苏苏州 215123武汉纺织大学先进纺纱织造及清洁生产国家地方联合工程实验室,湖北 武汉 430200苏州大学纺织与服装工程学院 江苏 苏州 215123||苏州大学现代丝绸国家工程实验室,江苏苏州 215123苏州大学纺织与服装工程学院 江苏 苏州 215123||苏州大学现代丝绸国家工程实验室,江苏苏州 215123
轻工纺织
同轴湿法纺丝螺旋结构温度传感抗应变干扰多壁碳纳米管
coaxial wet-spinninghelical structuretemperature sensingstrain insensitivitymulti-walled carbon nano-tubes
《纺织工程学报》 2026 (1)
73-81,9
国家重点研发计划资助项目(2022YFB3805803)国家自然科学基金资助项目(52173059)国家资助博士后研究人员计划资助(GZC20231882)先进纺纱织造及清洁生产国家地方联合工程实验室开放课题(FX20240018)江苏省自然科学基金资助项目(BK20250806)
评论