首页|期刊导航|纺织工程学报|具有相变储能功能的环糊精超分子气凝胶纤维制备与热管理应用

具有相变储能功能的环糊精超分子气凝胶纤维制备与热管理应用OA

Fabrication and thermal management application of cyclodex-trin-based supramolecular aerogel fibers with intrinsic phase change energy-storage ability

中文摘要英文摘要

气凝胶纤维是近年来发展出来的具有超低密度、超低热导率、高孔隙率和高比表面积的新型纤维,在保温隔热、智能纺织等方面展现出独特的性能.然而气凝胶纤维的制备通常需要经过溶胶-凝胶纺丝过程,这一过程对凝固浴、前驱体以及纺丝速率具有严格的要求.为此,提出了可注射水凝胶直接纺丝的策略.首先制备了基于α-环糊精-聚乙二醇主客体作用的超分子可注射水凝胶,该凝胶体系在水相中可快速形成凝胶网络结构,具备良好的流动性与剪切响应,可通过注射实现定向成型,为纤维化加工及挤出式3D打印提供可行途径.随后经叔丁醇置换和冷冻干燥处理后得到气凝胶纤维.该气凝胶纤维的密度为0.068 g/cm3、孔隙率高达71.2%.此外,该气凝胶纤维骨架中具有聚乙二醇结晶,潜热到达57.09 J/g,具备本征的相变储能功能.综合而言,提出了气凝胶纤维制备的一种新思路,通过良好的可注射性简化了制备过程,制备的气凝胶纤维具有本征相变储能功能,在人体可穿戴热管理方面具有重要的应用潜力.

Aerogel fibers have recently attracted increasing attention due to their ultralow density,low thermal conductiv-ity,high porosity,and high specific surface area,making them promising for thermal insulation and smart textile applica-tions.However,conventional fabrication relies on sol-gel spinning,which requires stringent control over coagulation conditions and precursor properties.An alternative direct-spinning strategy is developed using an injectable supramolecu-lar hydrogel.The hydrogel is constructed via the host-guest interaction between α-cyclodextrin and poly(ethylene gly-col),forming a three-dimensional network with excellent injectability and shear responsiveness,suitable for fiber shap-ing and extrusion-based three-dimensional printing.After tert-butanol solvent exchange and freeze drying,aerogel fibers with a low density of 0.068 g/cm3 and a high porosity of 71.2%are obtained.The presence of crystalline poly(ethylene glycol)within the fiber framework endows the material with intrinsic phase-change energy-storage capability,achieving a latent heat of 57.09 J/g.Presents a new strategy for the fabrication of aerogel fibers,in which the inherent injectability of the precursor markedly streamlines the fabrication process,offering materials with built-in thermal regulation func-tionality and strong potential for wearable thermal management applications.

孙欢;余财霞;郝莹;刘玲;王锦

中国科学院 苏州纳米技术与纳米仿生研究所纳米轻量化重点实验室,江苏 苏州 215123||中国科学技术大学纳米学院,安徽 合肥 230026中国科学院 苏州纳米技术与纳米仿生研究所纳米轻量化重点实验室,江苏 苏州 215123||中国科学技术大学纳米学院,安徽 合肥 230026中国科学院 苏州纳米技术与纳米仿生研究所纳米轻量化重点实验室,江苏 苏州 215123||中国科学技术大学纳米学院,安徽 合肥 230026中国科学院 苏州纳米技术与纳米仿生研究所纳米轻量化重点实验室,江苏 苏州 215123||中国科学技术大学纳米学院,安徽 合肥 230026中国科学院 苏州纳米技术与纳米仿生研究所纳米轻量化重点实验室,江苏 苏州 215123||中国科学技术大学纳米学院,安徽 合肥 230026

轻工纺织

气凝胶纤维超分子水凝胶可注射水凝胶环糊精包合物热管理材料

aerogel fiberssupramolecular hydrogelsinjectable hydrogelscyclodextrin inclusion complexesthermal management materials

《纺织工程学报》 2026 (1)

63-72,10

国家自然科学基金面上项目(52573311)江苏省杰出青年科学基金(BK20240027)

10.3969/j.issn.2095-4131.2026.01.005

评论