首页|期刊导航|爆炸与冲击|金属桥箔电爆炸驱动飞片过程流场瞬态观测与数值模拟

金属桥箔电爆炸驱动飞片过程流场瞬态观测与数值模拟OA

Transient observation and numerical simulation study on the flow field of flyer driven by the electric explosion of metal foil

中文摘要英文摘要

金属桥箔电爆炸驱动绝缘飞片的冲击起爆与点火技术在武器装备的起爆与点火系统中被广泛应用.为弥补现有研究对飞片运动过程中流场演化规律描述不足的缺陷,促进该技术向能量高效利用以及小型化等方面发展,搭建了双脉冲激光纹影瞬态观测实验系统,获得了不同时刻下流场的密度分布以及飞片的运动距离,同时,建立了金属桥箔电爆炸驱动飞片运动过程的二维轴对称流体动力学计算模型与计算方法,计算时充分考虑了加速膛内外流场在飞片运动、冲击波压缩以及高温高压等离子体膨胀等作用下的演化规律,采用相变体积分数法描述桥箔在电能作用下由固相到等离子体相的转变,建立了等离子体状态方程以准确描述等离子体的状态,采用动网格模型描述了飞片在流场驱动下的运动.计算与实验得到的流场密度分布具有较好的贴合性,且飞片运动距离和飞片运动速度的最大相对误差分别为 6.1%与 8.1%,验证了计算模型与计算方法的准确性.研究结果表明:电容为 0.33 μF、起爆电压为 2 800 V时,研究范围内,流场压强最大值基本维持在 1×107 Pa左右;流场温度逐渐从 516 ns时刻的 9 950 K降低到 2 310 ns时的3 100 K;流场等离子体相分布逐渐由扁平状发展为长条状,等离子体相与飞片运动垂直方向的最大扩散距离为0.8 mm.1 360 ns后,由于飞片突破冲击波波阵面,流场的压强分布与温度分布的前端突起.

Shock initiation and ignition techniques driven by electrically exploded metallic bridge foils with insulating flyers have been widely implemented in initiation and ignition system of weapon.To address the deficiency in existing research regarding the description of the flow field evolution during the motion of flyer and promote the development of this technology towards efficient energy utilization and miniaturization,a double-pulse laser schlieren transient observation system was constructed.This system enables the acquisition of density distributions of the flow field and the motion distance of the flyer at different time.Additionally,a two-dimensional axisymmetric fluid dynamics calculation model and calculation method for the motion process of flyer driven by the electric explosion of metal foil were established,and corresponding numerical simulation calculations were performed in consideration of the evolution laws of the flow field inside and outside the acceleration chamber under the effects of the motion of flyer,the compression of shock wave,and the expansion of high-temperature and high-pressure plasma.The phase transition of bridge foil from solid phase to plasma phase was described by phase transition fraction,the state of plasma with high temperature and pressure was described by the state equation of plasma which consider the changes in particle number and coulomb interaction between particles,and the motion of flyer was described by dynamic grid model.The calculated flow field density distribution closely matches the experimental results,and the maximum errors in flyer motion distance and velocity are 6.1%and 8.1%,respectively,validating the accuracy of the calculation model and calculation method.The research results indicate that when the capacitance is 0.33 μF and the initiation voltage is 2 800 V,within the research range,the maximum pressure in the flow field remains approximately 1×107 Pa;the temperature in the flow field gradually decreases from 9 950 K at 516 ns to 3 100 K at 2 310 ns;and the plasma phase distribution in the flow field gradually evolves from a flat shape to a long strip shape,with the maximum diffusion distance of plasma in the direction perpendicular to the motion of the flyer being 0.8 mm.At 1 360 ns,upon th flyer's breakthrough of the shock-wave front,a distinct bulge-shaped profile emerges in the leading edge of both pressure and temperature distributions within the flow field.

伍俊英;郑富德;姚雨乐;李钧剑;刘瑞政;刘丹阳

北京理工大学爆炸科学与安全防护全国重点实验室,北京 100081北京理工大学爆炸科学与安全防护全国重点实验室,北京 100081北京理工大学爆炸科学与安全防护全国重点实验室,北京 100081北京理工大学爆炸科学与安全防护全国重点实验室,北京 100081北京理工大学爆炸科学与安全防护全国重点实验室,北京 100081北京理工大学爆炸科学与安全防护全国重点实验室,北京 100081

数理科学

金属桥箔电爆炸飞片流场

metal foilelectric explosionflyerflow field

《爆炸与冲击》 2026 (1)

167-178,12

爆炸科学与安全防护全国重点实验室开放基金(KFJJ20-04M)

10.11883/bzycj-2025-0037

评论