MW级回旋行波管曲面阴极结构磁控注入电子枪研究OA

[Background]Gyrotron traveling wave tube(Gyro-TWT)is a vacuum electronic device with broad application prospects.Magnetron injection gun(MIG)is one of the core components of gyro-TWT,and its performance directly determines the success or failure of gyro-TWT.From the current domestic and international research results on MIGs it can be seen that the working voltage and current of existing MIGs are mostly low,and the velocity spread is generally high,which cannot meet the requirements of future megawatt-class gyro-TWT for MIG.[Purpose]In order to meet the requirement for MIG with high voltage,high current,and low electron beam velocity spread in the development of megawatt-class high-power gyro-TWT,this paper presents a novel design scheme for a single anode electron gun.[Methods]The novel electron gun scheme introduces a curved cathode structure to reduce the velocity spread of the electron beam,while effectively increasing the cathode emission area and reducing the cathode emission density.[Results]The results of PIC simulation show that under the working conditions of 115 kV and 43 A,the designed electron gun has a transverse to longitudinal velocity ratio of 1.05,a velocity spread of 1.63%,and a guiding center radius of 3.41 mm.The thermal analysis results indicate that the MIG can heat the cathode to 1 050℃at a power of 76 W.[Conclusions]The simulation and thermal analysis results indicate that the designed MIG meets the design expectations and satisfies the requirements of high voltage,high current,and low electron beam velocity spread for megawatt level gyro-TWT.